|
| |
Mini Digital Height Gauge w/fractions (WR25) |
 |
| 1. Set the base of the Height Gauge on a flat reference surface and lower the scale until it lightly touches
the surface. Set the display to 0.000. |
|
| |
| 2.
Set your router bit or saw blades to the desired position as shown. |
|
| |
| 3. Install the plunger and zero the gauge for measuring depths as shown below. |
|
| |
|
|
|
| |
Digital Height Gauge w/fractions (WR200) |
|
Step 1. Calibrate
Set the gauge flat on the tool reference surface and press the ZERO to set the gauge to 0.0 degrees. |
|
| |
Step 2. Set Height
Position the anvil to touch the surface of the saw blade or router bit and adjust the tool to achieve the desired setting. |
|
| |
|
|
|
